Wurth Two-Part Multi-Fill Primer 400ml

Two component epoxy primer filler for optimum application safety on all metals, anodised surfaces and GFRP. The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake the can vigorously for 2 minutes before spraying. Take the push button (red) out of the cap, place onto the pin on the base of the can and activate by pressing. Remove the push button and dispose of it. Shake the can vigorously again after spraying. Perform 2–3 (70 µm) spray passes at a distance of 20–30 cm. Observe the intermediate flash-off time (10–15 min.). Can be painted over with all commercially available top-coat systems.

• Contents: 400 ml
• Colour: Beige
• Drying time: 24 h
• Processing time: 4 d
• Conditions for drying time: at 20°C
• Min. flash-off time: 10 min
• Max. coating thickness: 70 µm
• Min. spraying distance: 20 cm
• Min. processing temperature: 20 °C
• Max. spraying distance: 30 cm